Tag Archive for 'Logitech'

Page 2 of 5

ubuntu + bluez + dfutool

What you need: ubuntu 8.04 live cd

ubuntu@ubuntu:~$ mkdir bluez
ubuntu@ubuntu:~$ cd bluez
ubuntu@ubuntu:~/bluez$ sudo apt-get remove bluez-utils
ubuntu@ubuntu:~/bluez$ sudo apt-get remove bluez-audio
ubuntu@ubuntu:~/bluez$ sudo apt-get remove libbluetooth2
ubuntu@ubuntu:~/bluez$ wget http://bluez.sf.net/download/bluez-libs-3.36.tar.gz
ubuntu@ubuntu:~/bluez$ wget http://bluez.sf.net/download/bluez-utils-3.36.tar.gz
ubuntu@ubuntu:~/bluez$ tar -xf bluez-libs-3.36.tar.gz
ubuntu@ubuntu:~/bluez$ tar -xf bluez-utils-3.36.tar.gz
ubuntu@ubuntu:~/bluez$ sudo apt-get install build-essential
ubuntu@ubuntu:~/bluez$ cd bluez-libs-3.36
ubuntu@ubuntu:~/bluez/bluez-libs-3.36$ sudo ./configure
ubuntu@ubuntu:~/bluez/bluez-libs-3.36$ sudo make
ubuntu@ubuntu:~/bluez/bluez-libs-3.36$ sudo make install
ubuntu@ubuntu:~/bluez/bluez-libs-3.36$ cd ..
ubuntu@ubuntu:~/bluez$ cd bluez-utils-3.36
ubuntu@ubuntu:~/bluez/bluez-utils-3.36$ sudo apt-get install libusb-dev
ubuntu@ubuntu:~/bluez/bluez-utils-3.36$ sudo apt-get install libdbus-1-dev
ubuntu@ubuntu:~/bluez/bluez-utils-3.36$ sudo ./configure –enable-dfutool
ubuntu@ubuntu:~/bluez/bluez-utils-3.36$ sudo make
ubuntu@ubuntu:~/bluez/bluez-utils-3.36$ sudo make install
ubuntu@ubuntu:~/bluez/bluez-utils-3.36$ cd
ubuntu@ubuntu:~$ dfutool

Nokia SU-27W

Nokia SU-27W

Bei ebay zu einem vernünftigen Preis geschossen. Die Fimwareversion ist zu der vom Logitech io2 mit BT identisch.

Logitech io2 Commercial mit Bluetooth

Im Netz findet man relativ wenig genaue Produktbeschreibungen.

Logitech io2 Commercial mit Bluetooth

Logitech io2 Commercial mit Bluetooth

  • dark blue
  • P-RUE9
  • P/N: 866142-0000
  • PID: LZ5284500**
  • FCC ID: DZL201938
  • IC: 1807B-201938

Continue reading ‘Logitech io2 Commercial mit Bluetooth’

io2 Stift Software

Wie ich heute festgestellt habe unterstützt die Logitech io2 Software 4.10 auch den Maxell DP-201 Stift!

Logitech Stift Software 4.0.847.1 (io2 Software 4.10):
Logitech Stift Software 4.0.847.1

Logitech Stift Software 4.1.852.1 (io2 Businesskit 4.0.3):
Logitech Stift Software 4.1.852.1

 Die Stift Sync Software aus der io2 4.10 ist aktueller als die aus dem io2 Businesskit 4.0.3.

Master Reset Digital Pen

You can perform a master reset to restore the pen to the factory settings. 
Warning: Use this procedure only as a last resort because you will lose all the information in the pen’s memory. 
To perform a master reset, do the following.

  1. Take off the pen cap.
  2. Press the pen tip on a surface while you press the reset button with a paper clip or pencil tip.
  3. Continue pressing the pen to the surface while you remove the paper clip or pencil tip from the reset button.  Hold the pen to the surface for 15 seconds, or until the pen vibrates to indicate it can be used again.

Maxell Penit DP-201

Vorletzten Sonntag auf ebay.uk ersteigert und heute bei mir angekommen.

Maxell Penit DP-201

von unten nach oben Logitech io2 Commercial, Maxell Penit DP-201 (der Neue), Nokia SU-1B

Ich muss mir jetzt erstmal die Maxell Software und ein Firmwareupdate besorgen. Mehr Informationen gibt es in den nächsten Wochen.

C-UV35 Update auf 2.11.25.0

Logitech C-UV35 mit 2.11.25.0

Logitech hat diese Woche ein Firmwareupdate für die C-UV35 Dongles veröffentlicht. Das Update wird mit der Aktualisierung der SetPoint Software auf 4.60 eingespielt.

Logitech C-UV35 mit 2.11.25.0
 

C-UV35 Firmwares

Datum Uhrzeit Größe Dateiname Broadcom Version Logitech Version Set
23.10.2007 05:01 233.411 RR0100_B0089.dfu 2.11.22.0 1.0.89-HCI MX5500
19.12.2007 05:40 233.407 RR0101_B0092.dfu 2.11.25.0 1.1.92-HCI MX5500
22.01.2007 04:11 230.323 RR4005_B0073.dfu 2.1.238.0 40.5.73-HCI diNovo Laser
03.04.2007 13:55 230.245 RR4006_B0077.dfu 2.1.245.0 40.6.77-HCI diNovo Laser
05.02.2008 02:07 233.123 RR4007_B0092.dfu 2.11.25.0 40.7.92-HCI diNovo Laser
16.01.2007 22:15 230.193 RR5103_B0072.dfu 2.1.235.0 51.3.72-HCI MX5000?
03.04.2007 13:55 230.147 RR5103_B0077.dfu 2.1.245.0 51.3.77-HCI MX5000?

edit 23.05.08 21:32

C-UV35 und die verschiedenen Desktops

Wie wird im Logitech C-UV35 Dongle festgelegt ob es mit dem Logitech MX5000 Desktop oder dem Logitech  diNovo Laser Desktop geliefert wurde?

Diese Frage geht mir seit einigen Tagen durch den Kopf. Die Firmwares im Dongle sind bei beiden Desktops nach meinen Erkenntnissen identisch!

Logitech C-UV35 Dongle

Nach dem Einstecken des Logitech EDGE C-UV35 Dongles wird ein USB Hub mit folgender VID: 046D PID: 0B04 erkannt.

lhid2hci.exe 046d c714 (akiviert den BT Mode)

C-UV35 Merkmale:

  1. VID: 046D PID: 0B06 => “6D 04 06 0B” => Logitech MX5500
    • VID: 046D PID: C71C (Maus)?
    • VID: 046D PID: C71B (Tastatur)?
  2. VID: 046D PID: 0B04 => “6D 04 04 0B” => Logitech EDGE
    • VID: 046D PID: C713 (Tastatur)?
    • VID: 046D PID: C714 (TouchPad auf der Tastatur)?
  3. VID: 046D PID: 0B02 => “6D 04 02 0B” => Logitech DiNovo Laser & Logitech MX5000
    • Logitech MX5000
      • VID: 046D PID: C709 (BT)
      • VID: 046D PID: C70A (Maus)
      • VID: 046D PID: C70E (Tastatur)
    • Logitech DiNovo Laser
      • VID: 046D PID: C709 (BT)
      • VID: 046D PID: C70C (Maus)
      • VID: 046D PID: C70B (Tastatur)