xam and tobolff

vorneweg noch zwei Links:
siemens.at/bluetooth/
blue2net.dyndns.org/

Log:
PPCBoot 1.0.1.5 (Feb  7 2002 - 16:32:24)

Initializing…
  CPU:   XPC850xxZTB at 48 MHz: 2 kB I-Cache 1 kB D-Cache
  Board: ### No HW ID - assuming ETX_094
  HW-Version: V0.9 / W50037-Q1-D6-1
  RSR: 0xc0000000
  DRAM:  16 MB
  FLASH:  2 MB
  In:    serial
  Out:   serial
  Err:   serial

Hit any key to stop autoboot:  0
=> help
go      - start application at address ‘addr’
run     - run commands in an environment variable
bootm   - boot application image from memory
bootp   - boot image via network using BootP/TFTP protocol
tftpboot- boot image via network using TFTP protocol
               and env variables ipaddr and serverip
rarpboot- boot image via network using RARP/TFTP protocol
bootd   - boot default, i.e., run ‘bootcmd’
loads   - load S-Record file over serial line
loadb   - load binary file over serial line (kermit mode)
md      - memory display
mm      - memory modify (auto-incrementing)
nm      - memory modify (constant address)
mw      - memory write (fill)
cp      - memory copy
cmp     - memory compare
crc32   - checksum calculation
base    - print or set address offset
printenv- print environment variables
setenv  - set environment variables
saveenv - save environment variables to persistent storage
protect - enable or disable FLASH write protection
erase   - erase FLASH memory
flinfo  - print FLASH memory information
bdinfo  - print Board Info structure
iminfo  - print header information for application image
coninfo - print console devices and informations
loop    - infinite loop on address range
mtest   - simple RAM test
bost    - BOST-tests [? or testnumber]
icache  - enable or disable instruction cache
dcache  - enable or disable data cache
reset   - Perform RESET of the CPU
echo    - echo args to console
version - print monitor version
help    - print online help
?       - alias for ‘help’
=>